Coil Tester & Power Supply POB30D

quote



Overview


pobdpobd

  • circuit breaker coil operation
  • spring-charging motor supply
  • lightweight – only 10,6 kg / 23.4 lbs
  • minimum trip voltage test of the circuit breaker’s coils
  • as a power supply for tests with breaker analyzers from different vendors

Coil Tester & Power Supply POB30D is powerful, lightweight power supply device, ideal for operating and testing circuit breakers coils. It is also intended to supply spring-charging motors with the possibility to generate the inrush current of up to 30 A DC. For supplying the circuit breaker auxiliary circuits, it provides wide output DC voltage range (10 – 300 V).

POB30D has built-in capability to perform an automatic test of minimum trip-voltage (in accordance to IEC 62271-100 and ANSI C37.09 standards).

POB30D can be used as a general power supply device or a temporary battery charger. Note that it is compatible with the circuit breaker analyzers from different vendors.

Accessories

Included accessories

  • Mains power cable
  • Ground (PE) cable
Recommended accessories

  • Cable set 6 x 2 m 2,5 mm2 (13 AWG)
  • Transport case
Optional accessories

  • Cable set 6 x 5 m 2,5 mm2 (13 AWG)
  • Device bag
  • Cable bag
  • External Trigger cable

Technical data

Mains Power Supply
  • Connection
according to IEC/EN60320-1; UL498, CSA 22.2
  • Voltage
90 V – 264 V AC, 50/60 Hz, Single phase
  • Power consumption
3000 VA
Output data
  • Coils output DC Voltage
10 V to 300 V DC
  • Motor output DC Voltage
10 V to 250 V DC
  • Output current
max 30 A
Measurement
  • Voltage
10 V – 300 V DC
  • Current
1 A – 50 A
  • Accuracy
± (0,25% rdg + 0,25% FS)
Environment conditions
  • Operating temperature
–10oC – +55oC / 14 F – 131 F
  • Storage and transportation
–40oC – +70oC / -40 F – 158 F
  • Humidity
Maximum relative humidity 95%, non-condensing
Dimensions and Weight
  • Dimensions
205 mm x 287 mm x 410 mm
8.1 in x 11.3 in x 16.4 in
(W x H x D) without handle
  • Weight
10,6 kg / 23,4 lbs
Mechanical protection
  • Mechanical protection
IP 43
Warranty
  • Warranty
three years
Safety

  • Low Voltage Directive 2014/35/EU (CE Conform)

  • Applicable standards, for a class I instrument, pollution degree 2,
       Installation category II : IEC EN 61010-1

  • CAN/CSA-C22.2 No. 61010-1

Electromagnetic Compatibility

  • Directive 2014/30/EU (CE Conform)

  • Applicable standard EN 61326-1

All specifications listed herein are valid at the ambient temperature of + 25 °C (77°F) and with the recommended accessories included.

Specifications are subject to change without notice.

Download


Download brochure


Version: 300
Published: 2016-01-25

Back To Top