Coil Analyzer SAT40A is a powerful instrument ideal for testing of circuit breakers, where substation battery is not connected or available. The SAT40A is intended to operate breaker coils, and spring charging motors as a part of commissioning and maintenance testing.The SAT40A has an DC and an AC motor supply output.
SAT40A measures current and resistance of circuit breaker coils. SAT40A can also be used to test minimum trip voltage of circuit breaker coils.
Output voltage is selectable from 10 V to 300 V DC or from 10 V to 250 V AC.
The set is equipped with thermal and over current protection. SAT40A is easy to use and has accessory cable-set with touch-proof contacts.
The SAT40A has very high ability to cancel electrostatic and electromagnetic interference in the HV electric fields. It is achieved by very efficient filtration. The filtration is made utilizing proprietary hardware and software.
|Mains Power Supply|
||according to IEC/EN60320-1; UL498, CSA 22.2|
||90 V – 264 V AC, 50/60 Hz, Single phase|
||10 V to 300 V DC|
||10 V to 250 V AC; 50/60 Hz; true RMS|
||10 V to 250 V DC|
||max 40 A|
||10 V – 300 V DC or 10 V – 250 V AC|
||1 A – 50 A|
||± (0,25% rdg + 0,25% FS)|
|Coil resistance measurement|
||1 O – 99,9 O / 0,1 O
100 O – 999 O / 1 O
||± (0,5% + 0,5 F.S.)|
||–10oC – +55oC / 14 F – 131 F|
||–40oC – +70oC / -40 F – 158 F|
||Maximum relative humidity 95%, non-condensing|
|Dimensions and Weight|
||205 mm x 287 mm x 410 mm
8.1 in x 11.3 in x 16.4 in
(W x H x D) without handle
||10 kg / 22.05 lbs|
- Low Voltage Directive 2014/35/EU (CE Conform)
- Applicable standards, for a class I instrument, pollution degree 2,
Installation category II : IEC EN 61010-1
- CAN/CSA-C22.2 No. 61010-1
- Directive 2014/30/EU (CE Conform)
- Applicable standard EN 61326-1
All specifications listed herein are valid at the ambient temperature of + 25 °C (77°F) and with the recommended accessories included.
Specifications are subject to change without notice.
By using DV-Win software, operating and testing circuit breaker’s coils is even more practical. Both, initial test parameters and test results, for any of the selected test, are displayed in a single row.
Besides the option of initiating operation and testing circuit breaker’s coils, the DV-Win software provides displaying, in numerical and graphical form, the circuit breaker’s motor voltage and current values along with the motor’s charging time.
Previous test results can be easily downloaded from the device internal memory to the PC by using of several different search filters.