| Coil Analyzer SAT30 |
Brochure SAT30 
Print this page  |
- Lightweight - only 9 kg
- Powerful - up to 30 A
- Voltage 10 V to 300 V DC
- Voltage 10 V to 250 V AC
- Coil resistance measurement
- Coil current measurement
- Minimum trip voltage test
- Fully automatic operation
|
| Powerful breaker coils analyzer |
| Description |
| SAT30 is a powerful breaker coils analyzer using the latest power electronics technology.
SAT30 generates ripple free DC or AC voltage and it is developed for regular maintenance tests of power circuit breakers.
Output voltage is selectable from 10 V to 300 V DC or from 10 V to 250 V AC. The SAT30 is powerful and versatile unit, with possibility to generate at 230V mains supply initial current of 30 A as well as continuous current according to the tables below:
|
| 230 V |
110 V DC |
24 A
20 A
10 A |
20 sec
60 sec
30 min |
| 220 V DC |
12 A
10 A
7 A |
20 sec
60 sec
30 min |
| 115 V |
110 V DC |
12 A
10 A
7 A |
20 sec
60 sec
30 min |
| 220 V DC |
7 A
6 A
5 A |
20 sec
60 sec
30 min |
|
| 230 V |
110 V AC |
10 A
5 A |
800 msec
30 min |
| 220 V AC |
10 A
5 A |
800 msec
30 min |
| 115 V |
110 V AC |
10 A
5 A |
800 msec
30 min |
| 220 V AC |
10 A
5 A |
800 msec
30 min |
|
The set is equipped with thermal and overcurrent protection.
SAT30 is easy to use and has accessory cable-set with touch-proof contacts.
The SAT30 has very high ability to cancel electrostatic and electromagnetic interference in HV electric fields. It is achieved by very efficient filtration. The filtration is made utilizing proprietary hardware and software. |
| Applications |
| SAT30 is developed for use in switchyards, electric power and industrial environment. An important part of commissioning and maintenance testing is a circuit breaker testing.
SAT30 is used for:
|
- operating circuit breakers
- supplying spring-charging motors
- coils resistance measurement
- coils current measurement
- power supply at test with breaker analysers
- minimum trip-voltage test of the circuit breaker's coils
|
| SAT30 have built-in capability to perform an automatic test of minimum trip-voltage. The minimum trip- voltage test is described in a number of international and national standards such as IEC 62271-100, ANSI C37.09 etc. Many other important parameters are possible to test with a breaker analyser. SAT30 is then used as a power supply unit. It is compatible with breaker analysers from different vendors. SAT30 can also be used as a general power supply unit or a temporary battery charger. |
| Automatic testing of the minimum trip voltage of a breaker |
Procedure steps:
1. Make certain that the mains are de-energised on both sides of the breaker, safety
grounded and that local safety regulations are followed.
2. Connect Power supply unit SAT30 to the breaker's coil circuit.
3. Set the minimal test voltage.
4. Set the step voltage.
5. Set the maximal voltage.
6. Press START button. |
| Coil resistance measurement as a unique option on all coil testers. |
| Experience from field testing of circuit breakers show that, measurement of coil resistance is very important task for circuit breaker monitoring. This feature makes Coil Analyzer SAT30 as one of most versatile and useful devices for Circuit Breaker coil analysis on market.
|
| Standard accessories |
- Cable set 6 x 2 m 2,5 mm2
- Extern trigger cable set 2 m
- Mains power cable
- Ground (PE) cable
- Transport bags
|
| Optional accessories |
- Cable plastic case
- Transport case
|
| |
 |
|
 |
| Transport case |
|
Cable set |
|
| |
| Technical data |
| 1 Mains Power Supply |
| - Connection |
according to IEC/EN60320-1; UL498, CSA 22.2 |
| - Voltage single phase |
110 V - 240V AC, +10% - –15% |
| - Frequency |
50/60Hz |
| 2 Output data |
| - Coils output DC Voltage |
10 V to 300 V DC |
| - Coils output AC Voltage |
10 V to 250 V AC; 50/60Hz; true RMS |
| - Motor output DC Voltage |
10 V to 250 V DC |
| - Output Current |
max 30 A |
| 3 Measurement |
| - Voltage |
10 V - 300 V DC or 10 V - 250 V AC |
| - Current |
1 A - 50 A |
| - Accuracy |
±(0,5% rdg + 0,5% FS) |
| 4 Coil resistance measurement |
| - Measuring range/Resolution |
0,5 Ω - 99,9 Ω / 0,1 Ω |
| |
100 Ω - 999 Ω / 1 Ω |
| - Typical accuracy |
±(0,5% rdg + 0,5% FS) |
| 5 Environment conditions |
| - Operating temperature |
-10°C - +50°C / 14°F - +122°F |
| - Storage and transportation |
-40°C - +70°C / -40°F - +158°F |
| - Humidity |
5% - 95% relative humidity, non condensing |
| 6 Dimensions and Weight |
| - Dimensions |
198 mm x 255 mm x 380 mm
7,8 in x 10 in x 15 in
(W x H x D) without handle |
| - Weight |
9 kg/19,8 lb |
| 7 Mechanical protection |
IP43 |
| 8 Warranty |
three years |
| 9 Safety Standards |
| - European standards |
EN 61010-1
LVD 73/23/EEC |
| - International standards |
IEC 61010-1
UL 3111-1
CAN/CSA-C22.2 No 1010.1-92 |
| 10 Electromagnetic Compatibility (EMC) |
| - CE conformity |
EMC standard 89/336/EEC |
| - Emission |
EN 50081-2, EN 61000-3-2/3 |
| - Interference Immunity |
EN 50082-2 |
|
| |